Savaria offers the V-1504 vertical wheel chair platform lift, the most versatile lift on the market. For the first time in the industry it is possible to actually equip the same drive system with several different platform configurations. 

The unique drive and platform combinations of the V-1504 vertical wheel chair platform lift allows for rapid delivery and ease of installation in respect to any architectural requirements. 

Due to its versatile design, the V-1504 vertical wheel chair platform lift can be installed indoors or outdoors in both residential or public buildings. 


Standard equipment available on all V-1504 vertical wheel chair platform lifts: 
750 lbs (340 kg) capacity 
Maximum travel of 23' (7,000 mm)* 
Travel speed: 25 feet/min (0.13 m/s) approx. 
34inches x 54inches (864 x 1,372 mm) minimum platform dimensions 
12 VDC battery operation 
Emergency battery lowering 
Remote location emergency manual lowering valve 
2:1 chain hydraulic drive system 
Gear type hydraulic pump 
8 foot long modular guide rail assembly 
Roller guide shoes 
1.5 hp (1,119kW) output 
Electronic free relay logic controller 
Automatic battery recharching system (115 VAC) 
Combination mechanical lock and electric contacts or electric strike* 
Low voltage controls 
Normal limit switch 
Control buttons on platform* 
Keyed call station 
Continuous pressure directional buttons 
42inches (1,067 mm) high side guard panels 
Non-skid platform surface 
Beige acrylic urethane paint on all steel surfaces 
No machine room required 
Optional equipment available:
Special platform dimensions up to 18 ft2 (1.67 m2)* 
Enter/exit same side 
90 exit 

Intermediate stops 
Platform gate 
Top landing gate 
115 VAC operation (115 VAC up direction and 12 VDC battery down) 
Upper/lower landing door 80inches (2,032 mm) 
Flush mounted 80inches (2,032 mm) door and frame, 1H1/2 ULC fire-rated 
Portable unit package 
Stair bridge 
Flip up seat 
Custom color 
Public building package conforms to CSA-B355 and ASME A18.1* 
Emergency light and alarm 
Direct hydraulic drive system 
Outdoor package including electro-deposited yellow zinc coating 
Motorized door 
* Consult local codes and regulations


V1504-STD The standard model is built around a powerful hydraulic system which can raise a platform and the users throughout various architectural boundaries. It is designed to fit indoor hoistway applications and also for outdoor use. 
V1504-TL The tall enclosure model is designed to provide an enclosure with metal inserts from the bottom landing door to the top landing gate. It is a good alternative to a three gate system because of it's simplicity and ease of operation. 
V1504-PE
V1504-ALPE The plexiglass enclosure model is designed to provide an aesthetic enclosure with plexiglass inserts. It is available with various travels and is offered with top landing gate for semi-enclosed hoistway or with top landing door, enclosure extension and plexiglass dome for both indoor and outdoor applications. The ALPE model is made of an aluminum enclosure and a yellow zinc treatment on steel parts to withstand the outdoor environment. 
V1504-LUX The luxury model has been created to meet those very personalized architectural needs. It is a rich blend of tempered glass, stainless steel or brass materials. It is designed with a bottom landing door and top landing gate or door. 
V1504-MOB The mobile model is a lift that can be rolled inside a building to any low rise barrier in order to become wheelchair accessible. It easily stores out of sight when not in use 
