Savaria offers the ES-125 stair wheel chair platform lift, the ideal solution for getting someone in a wheel chair up and down stairs safely.

The ES-125 stair wheel chair platform lift is designed for residential use. It's compact folding platform leaves the stairway virtually unobstructed when not in use. It can be used both indoors and outdoors.

The ES-125P stair wheel chair platform lift and ES-125 Plus stair wheel chair platform lift with top landing drive cabinets are designed to be installed in public buildings such as: schools, churches, municipal buildings, nursing homes, restaurants, community centres, etc. It can be installed indoors as well as outdoors and it can be custom-built to satisfy all types of architectural requirements. 

They meet or exceed the CSA-B355 and ASME A18.1 standards regarding elevating devices for the handicapped.

Available options

3-position safety armrests 
Fold-down seats with safety belt 
Powered fold platform 
Touch sensitive plate on the access ramps and under the platform to stop the lift if an obstruction is encountered 
12 volt battery operation 
Hand-help pendant control on the platform 
Split rail 
Drive cabinet at top landing 
Audio visual alarm 
Motor with electro-mechanical brake 
Emergency stop switch 
Special color 
Outdoor package 
Self-support posts 
Flush cabinet at front or back of rail (Plus system) 


---------------------------------------------------
Stair Wheel Chair Platform Lift - Model ES-125 - General specifications
Platform:


Dimensions Type I: 27.50inches x 36inches (700 x 914 mm) - Type II: 28.50inches x 44inches (724 x 1,118mm)
Type III: 30inches x 48inches (762 x 1,219 mm) - Type IV: 30inches x 44inches (762 x 1,118 mm)
All platforms have non-skid surfaces. The platform can be folded manually or with the help of an optional power-fold platform. Once folded the unit uses very little space in order to leave the staircase virtually unobstructed. 
Access ramps Two positive action automatic access ramps for straight or 90 entry 
Motor assembly 110 VAC,  hp (373 W), 1,750 rpm / gear reducer: 50:1 
Type of drive unit Standard system: Aircraft cable 3/16inches (5 mm) with breaking load of 4,200 lbs (1,950 kg), deviator pulley and winding drum in a machine room. Plus system: Roller chain #50 and aircraft cable with breaking load of 6,100 lbs (2,767 kg). The electric motor gear reducer and controller are self enclosed at the top landing in a drive cabinet. No machine room required. 
Controller Meets CSA and ETL standards - 24 VAC operating controls 
Power Supply 110 VAC, 1Ph, 60Hz, 15 amp 
Rated speed 14.0 ft / min. (0.071 m / s) (approx.) 
Capacity One person in a wheelchair 
Rated load 450 lbs (240 kg) 
Operating controls* Continuous pressure directional buttons are installed on the platform with a key switch for increased safety. (*) 
Call stations Continuous pressure directional buttons are installed at each landing. 
Finish One coat of primer and two coats of beige acrylic urethane paint on all steel surfaces. 
Safety features Automatic dual access ramps, mechanical emergency brake in case of drive system failure, slack cable switch, keyed continuous pressure controls and upper / lower limit switches are standard features on this unit. 

